Automatic Oil Heating Solar Module Laminator

The Best Automatic Oil Heating Solar Module Laminator Manufacture!

Qinhuangdao Hongchengda(HCD) It is a comprehensive high-tech enterprise dedicated to R&D, manufacturing, sales, and after-sales service of solar module laminators and special equipment for other industries.

Why Choose Us

Rich In Experience

Experienced technical team especially for solar module laminators, we can do the effective laminating area within 12500mm*2900mm, cover all different kinds of solar modules like.

Quality Control

Incoming Quality Control&Manufacturing Process Inspection&Finished Product Inspection
Three links of quality inspection, to ensure the quality of the machine and more than 15 years of service life.

After Sales Service

Preparation Before Laminators' Arrival&On Site Installation, Debugging And Training&7*24hours Remote Technical Support
Will be greeted with warm, friendly and professional service, with the after sales engineer whom from solar module maker factory, In order to make customers more comprehensive and convenient use of the whole machine.

Technical Parameters

Technical Parameters	Related parameters
Effective lamination area	2400 mm×5500mm×2
Equipment Dimension	27970mm ×3300 mm×2540mm
Total weight	49T
Operation Power	AC 380V 3-phase 5-wire system
Power	Total power : 195kW, normal working power : 110kW
Compressed air	Pressure 0.7～0.8MPa; compressed air flow ≥1000L/min
Cooling water	Pressure 0.2 ~ 0.3Mpa, flow rate 2060L/min (including Roots pump), water temperature is not higher than 25℃
Temperature	Temperature distribution uniformity ±1.5℃; temperature control accuracy ±1℃; temperature control range 30℃-180℃
Vacuum	The ultimate vacuum is 30Pa; can quickly go below than 120Pa from the atmospheric state within 120 seconds
Pressurization pressure	Three inflation speed modes adjustable; from -100KPa to 0KPa
Inflation	Inflate from -100KPa to 0KPa within 10 seconds
Cooling	Cooling in the cooling section
The specific parameters are subject to change without notice.

The issues faced while using a solar module laminator and solutions

Problem 1: Uneven Pressure

One of the primary problems faced while using solar module laminator is uneven pressure on the solar cells. Uneven pressure can result in bubbles and wrinkles on the solar panel surface, making it less efficient. To solve this problem, the machine's rollers should be checked and properly aligned. The rollers' alignment ensures that the pressure is applied evenly, and the solar cells' surface is not damaged during the lamination process.

Problem 2: Temperature Fluctuations

Another problem faced while using a solar module laminator is temperature fluctuations. The temperature needs to be maintained consistently for the lamination process to be successful. An uneven temperature during the lamination process can lead to the creation of voids or air pockets between the layers, reducing the efficiency of the solar panel. A solution to this problem is to ensure that the heating elements are functioning correctly and that the temperature is monitored and regulated continuously.

Problem 3: Moisture

Moisture is another issue faced while using a solar module laminator. Moisture can cause oxidization of the metallic contacts, leading to electrical resistance and loss in efficiency. It can also lead to the formation of bubbles and voids between the layers of the solar panel. A solution to this problem is to ensure that the lamination environment is dry and free from moisture. Additionally, the use of moisture-resistant materials during the lamination process can prevent moisture from entering the solar panel.

Custom

Logo Customization

Minimum order quantity: 1 Sets

Packaging Customization

Minimum order quantity: 1 Sets

Pattern Customization

Minimum order quantity: 1 Sets

Our Factory

Cover all different kinds of solar modules like crystalline silicon module, BIPV module, IBC/Topcon/HJT modules, Perovskite/ CdTe(cadmium telluride) modules and curved glass modules. Also for Oil heating, electrical heating, and bifacial heating laminators.

productcate-1-1

Certificate

FAQ

Q: How do I place an order?

A: You can contact us by email for details of your order, or order online.

Q: How can I pay you?

A: After you confirm our PI, we will ask you to pay. T/T (HSBC) and Paypal, Western Union are our most commonly used methods.

Q: Can solar panels be made without oil?

A: Occasional electricity from wind turbines and solar panels. Like the products that need electricity, all the methods to generate electricity are also dependent on the petrochemicals manufactured from crude oil to make all the parts and components of every method to generate electricity.

Q: Do solar panels work at night?

A: Do solar panels work at night? The answer is no, they don't. As we mentioned earlier, solar panels need light — preferably sunlight — to create energy. Although they can generate some energy from other light sources such as street lights and even the moon, the output is very low.

Q: Can solar panels work without inverter?

A: Can solar panels work without an inverter? Yes, solar can work without an inverter if DC exclusively powers your load or appliance. An inverter converts DC to AC, allowing us to power our alternating load.

Q: How to connect solar panel without battery?

A: Connect the positive terminal of the solar panel to the positive input terminal of the inverter. Connect the negative terminal of the solar panel to the negative input terminal of the inverter. Turn on the inverter and monitor the output voltage and current to ensure that the inverter is operating properly.

HONGCHENGDA is one of the most professional automatic oil heating solar module laminator manufacturers and suppliers in China. We warmly welcome you to wholesale high quality automatic oil heating solar module laminator at competitive price from our factory. For quotation, contact us nowOil Heating Single Layer Laminator, PV production line equipment solar panel laminator, Oil Heating Double Layer Laminator